S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
Drive/Propeller Shaft: Removal and Replacement
AR41.10-P-0200I Replacing Centering Sleeve
Centering Sleeve Replacement
Illustration Shows Front Propeller Shaft
Illustration Shows Rear Propeller Shaft
Remove/Install
1
Remove propeller shaft
2
Label front and rear propeller shaft (12) in relation to three or four-arm flange (arrows) and remove
-
Check flexible coupling for damage and replace if necessary
NOTE: Replace self-locking nuts
3
Loosen fitted sleeves of flexible couplings
4
Remove front and rear flexible coupling (12)
5
Remove vibration damper (model 220.028/128) (20) from the rear propeller shaft (2)
NOTE: Installation: Mount vibration damper (model 220.028/128) (20) and propeller shaft as per labeling