S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
/v12-6.0l_turbo_(275.982)/Page-3223005.png)
The tightening sequence of the nuts and bolts is to be adhered to on a mandatory basis.
9. Screw on the crossmember finger-tight with four self-locking nuts M10 (15) on the right of the rear center section.
The nuts M10 (15) may only be tightened to the specified torque after aligning the trailer hitch.
10. Screw on crossmember finger-tight with two self-locking nuts M10 (15) on the left of the rear center section.
The nuts M10 (15) may only be tightened to the specified torque after aligning the trailer hitch. The long studs (arrows) on the crossmember are
only fastened after installing the mounting console with two nuts M10 (15).
11. Screw the left longitudinal member reinforcement finger-tight onto the vehicle longitudinal member with two self-locking bolts M10 x 25 (5).
The bolts M10 x 25 (5) may only be tightened to the specified torque after aligning the trailer hitch.
