SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-1472001.png)
Differential Mount: Service and Repair
NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
REMOVAL
1. Remove Complete Rear Axle/Suspension.
2. Remove bolts (50a)
2. Remove front center assembly mounting
3. Support rear axle with wooden blocks as follows:
-
Raise rear axle carrier approx. 400 mm
-
Place suitable wooden blocks under the four mounting points of the rear axle carrier (arrows)
4. Remove rear rubber mounts of rear axle center assembly as follows:
-
Pull the two rubber mounts (62) forwards out of the rear axle carrier (015, 016) using removal/installation tool No. 210 589 02 43 00, or
equivalent with parts 15 and 16
INSTALLATION
Reverse procedures to install, noting the following:
