Workshop Manuals Factory service & repair Mercedes Benz
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Mercedes Benz SLK 230 (170.447) L4-2.3L SC (111.973) (2000)03 · Maintenance
03 · Maintenance

Suspension - New Alignment Tools and Procedures

Make
Mercedes Benz
Model
SLK Class SLK 230 (170.447)
Engine
L4-2.3L SC (111.973)
Year
2000
Section
Alignment › Technical Service Bulletins › Suspension - New Alignment Tools and Procedures
MaintenanceSuspension - New Alignment Tools and Procedures · page 1 of 6
Suspension - New Alignment Tools and Procedures – Mercedes-Benz SLK 230 R170 L4-2.3L SC M111 (2000)

Alignment: Technical Service Bulletins
Suspension - New Alignment Tools and Procedures

Date: August 1998

Order No.: P-SI-MBNA-40/30A, 58/97A

Supersedes: S-SI-MBNA-40/30, 58/97, February 1998

Group: 40, 58

Revision:
Updated to include electronic data transfer and charging station operating instructions

SUBJECT: 
MODELS 170, 202, 208, 210 AND ALL FUTURE MODELS
NEW TOOLS AND PROCEDURES FOR CHASSIS ALIGNMENT

With the introduction of models 208 and 210 4MATIC, the vehicle chassis alignment procedures have been revised to include the use of an inclination
angle measuring tool (or Electronic Level Gauge) (Figure 1). This new alignment procedure for determination of the vehicle level is also immediately
applicable to models 170, 202, and 210, as well as all future models.

Note:

Vehicle chassis measuring procedures for models 129 and 140 remain unchanged.

Establishing vehicle ride height (vehicle level) using the Electronic Level Gauge

Using this tool, the vehicle ride height is determined by the lateral angle of the control arms or rear axle shafts. By determining the measured angle in
"decimal" degrees, the adjustment values for camber and caster are determined.

Carefully read this Service Information and the Operating Instructions supplied with the tool prior to starting the measurements.

Measurement Procedure

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

The same page in: SLK 230 (170.447) L4-2.3L SC (111.973) (2000), SLK 230 (170.449) L4-2.3L SC (111.983) (2001), SLK 230 (170.449) L4-2.3L SC (111.983) (2001).

Parts & tools for this job For 2000 Mercedes-Benz SLK Class 2.3L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.