SLK 320 (170.465) V6-3.2L (112.947) (2002)
Check values for propeller shaft inclination angle
Workshop equipment
Component Identification
The display indicates that the meter is ready to measure angle 5. This angle is no longer measured.
1
Press MEMORY button once. The main menu appears.
2
Press MEMORY button again.
The measured absolute angle is displayed in the memory and the resultant articulation angle 1and articulation angle 2 is displayed.
3
Record resulting articulation angle 1, e.g. +0.26 degrees and articulation angle 2, e.g. +0.58 degrees on the data sheet.
4
Press the STEP button.
Memory display: inclination angles 1 and 2
The stored data appear in the display as the measured absolute angle and the inclination angle 3 calculated from this figure.