Cougar/XR7 V8-4.6L VIN W (1997)
Heated Glass Element Switch: Testing and Inspection
1. Ground Pin 4 and connect a jumper wire between Pins 2 and 3. Connect a voltmeter between Pin 1 and ground.
2. Apply power to Pin 2. The indicator should not light.
3. Apply power to Pin 5. The indicator on the heated back window switch and light should light up.
4. Momentarily actuate the heated back window switch and light to the ON position. The indicator should come on and stay on after heated back
window switch and light returns to the normal position.
5. The indicator should go off under any one or more of the following conditions:
a. Heated back window switch and light is moved to the OFF position.
b. Jumper wire between Pins 2 and 3 is removed.
c. Approximately 10 minutes have elapsed.
