mercury Workshop Repair Guides

Mercury Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Alarm System Transmitter: Service and Repair

Passive Anti-Theft System (PATS) Transceiver

Removal and Installation

1. Remove the ignition lock cylinder. For additional information, refer to Doors, Hood and Trunk &/or Locks.

2. Disconnect the electrical connector.

3. Using a suitable tool (such as a dentist pick), release the 2 tabs and remove the Passive Anti-Theft System (PATS) transceiver.

4. NOTE:  Replacement of the PATS transceiver does not require the PATS keys to be programmed into the PCM again.

To install, reverse the removal procedure.

Accessories and Optional Equipment > Antitheft and Alarm Systems > Alarm System Transmitter > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >