Grand Marquis V8-4.6L Flex Fuel (2010)
5. Install the separator plate and gaskets.
6. Install the 2 valve body reinforcement plates and the 9 bolts.
-
Tighten to 10 Nm (89 lb-in).
7. NOTE: Inspect the shift solenoid O-rings and TCC solenoid O-rings for damage.
Install the shift solenoid.
1. Position the TCC solenoid.
2. Position the shift solenoid.
3. Install the bolt.
-
Tighten to 10 Nm (89 lb-in).
