Milan FWD L4-2.3L (2008)
4. Disconnect the upper radiator hose from the radiator.
5. Detach the retainer from the radiator.
6. Disconnect the radiator-to-degas bottle hose from the radiator.
Automatic transmission vehicles
7. Disconnect the 2 transmission cooling tubes from the radiator.
^
To install, tighten to 30 Nm (22 lb-ft).
All vehicles
8. Disconnect the lower radiator hose from the radiator.
9. Lift and remove the tabs from the upper radiator support and position the radiator towards the engine.
10. Remove the A/C condensor-to-radiator pin-type retainer.
