Milan FWD L4-2.5L (2010)
Hood Latch Release: Service and Repair
Hood Latch Release Handle
Hood Latch Release Handle
Hood Latch Release Cable Routing
Removal and Installation
1. Remove the hood latch. For additional information, refer to Hood Latch See: Hood Latch/Service and Repair.
2. Remove the LH fender splash shield.
3. Release the 2 hood latch release cable locators from the radiator grille opening panel reinforcement.
4. Disconnect the hood latch release cable from the LH fender opening, open the 2 hood latch release cable locators and position the cable aside.
5. Release the hood latch release cable locator from the wiring harness.