Milan FWD L4-2.5L (2010)
6. Remove the access door and install two (2) J-retainer clips to the underbody cover access door opening. (Figure 2)
7. Reinstall the access door using two new fasteners. Torque the fasteners to 22 +/- 4 lb-in. (2.5 +/- 0.5 N.m).
8. Reinstall the underbody cover. Refer to WSM, Section 303-01A.
Parts Block
WARRANTY STATUS: Eligible Under Provisions New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
100410A
2010 Fusion, Milan 2.5L:
0.3 Hr.
Inspect Access Door, And
Replace The Underbody
Cover (Do Not Use With
Any Other Labor
Operations)
100410B
2010 Fusion, Milan 2.5L:
0.4 Hr.
Inspect Access Door, And
Install 2 Additional
Fasteners Includes Time
To Remove And Install
The Underbody Cover (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
5410494
07
Disclaimer