Milan FWD L4-2.5L (2010)
23. NOTE: For proper installation during assembly, note the location of the pushpins on the recliners Using a suitable tool, remove and discard the two
pushpins that attach the backrest trim cover to the inboard and outboard recliners. See Figure 16.
24. NOTICE: Care must be used when separating the seat back trim cover from the hook-and-loop strip or the hook-and-loop strip may be damaged.
Remove the first row of hog rings from the foam pad. See Figure 17.
1. Reposition the backrest trim cover lower J-clip and release the hook-and-loop strips.
2. Fold the backrest trim cover back.
3. Using a suitable cutting tool, remove and discard the first row of hog rings.
NOTE:
Heated seat shown, non-heated seat similar.