Milan FWD L4-2.5L (2010)
The RH outboard side shown, LH side similar.
(NEW!) 15. NOTE: For proper routing during assembly, note the orientation of the half moon cable end fitting.
Release the RH recliner cable housing from the recliner and unhook the cable end. See Figure 6.
(NEW!) 16 If equipped with a power seat, release the RH recliner cable pin-type retainer by compressing both tabs and discard. See Figure 7.
17. Pull the seat cushion trim cover in toward the center of the seat and twist rearward to release the trim cover retaining pocket from the metal tab of
the LH recliner Separate the hook and loop from the safety belt buckle. See Figure 8.