Milan FWD V6-3.0L (2010)
21. Verify that the file is present on the scan tool. If the file is present, go to Step 25. If the file is not present, continue with this procedure.
22. Connect the scan tool to the PTS server.
The screen will display a progress bar when connecting to the network.
23. Follow the instructions on the network to download the strategy file to the scan tool.
The screen will display a progress bar when downloading the strategy file to the scan tool and display a message if it is downloaded successfully.
24. If the scan tool cannot connect to the PTS server, download the file from www.motorcraft.com.
If the scan tool cannot download a strategy from the web site, a partial strategy will automatically be downloaded.
25. Reconnect the scan tool to the vehicle.
26. Follow the instructions displayed on the scan tool.
27. If a new solenoid body was installed, compare the 7-digit identification and the 13-digit strategy fields from the solenoid body to the replacement
solenoid body tag provided with the solenoid body service kit and place it over the existing identification tag.
The scan tool will automatically download the strategy file or partial strategy file to the PCM and will display a progress bar while downloading.
The scan tool will display a message when it is finished downloading the data that states that the file was downloaded successfully.
28. Start the engine and let it run for 3 minutes. Move the range selector lever into each gear position. Check the transmission fluid level, making sure
that the transmission fluid is at the correct level.