Montego AWD V6-3.0L VIN 1 (2005)
Lifter / Lash Adjuster: Service and Repair
Hydraulic Lash Adjuster
Material
Material
Removal and Installation
1. Remove the camshaft roller followers.
2. NOTE: Mark the positions of the hydraulic lash adjusters to make sure they are assembled in their original positions.
Remove the hydraulic lash adjusters.
3. NOTE: Inspect the hydraulic lash adjusters for scoring marks and uneven wear in the bore. Install new lash adjusters if necessary.
To install, reverse the removal procedure.
^
Lubricate the hydraulic lash adjusters with clean engine oil.
