Montego AWD V6-3.0L VIN 1 (2005)
7. Install the safety canopy module 4 middle bolts.
-
Tighten bolts to 7 Nm (62 lb-in).
8. NOTE: Make sure the A-pillar trim bracket hook is fully seated in the A-pillar sheet metal.
Attach the A-pillar trim bracket hook to the A-pillar and install the 2 bracket bolts.
-
Tighten bolts to 9 Nm (80 lb-in).
9. Install the safety canopy module front tether bracket bolt.
-
Tighten bolts to 9 Nm (80 lb-in).
Vehicles with moonroof
10. Attach the 2 front moonroof drain hose routing clips to the A-pillar.