Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Alignment: Specifications
Caster
LH
4.2 - 1.0 deg
0 deg. Frame Angle (If vehicle is higher in the rear, add
the frame angle to the measured caster. If vehicle is
lower in the rear, subtract the frame angle from the
measured caster. Compare the total to the specification.)
RH
4.2 - 1.0 deg
Total/Split
-0.7 +/- 0.5 deg
Camber
LH
-0.5 +/- 0.5 deg
RH
-0.5 +/- 0.5 deg
Total/Split
0 +/- 0.7 deg
Toe
0.12 +/- 0.25 deg
@ Curb Ride Height (positive value is toe-in, negative
value is toe-out)
Wheel Track
0.02 in
Dogtracking
1.18 in
maximum (centerline of front tires compared to centerline
of rear tires)
Clear Vision
-2.4 +/- 3.0 deg
(negative value is counterclockwise)
Front Ride Height
New Vehicles With less than 500 miles
4.4 +/- 0.4 in
Original Parts
4.0 +/- 0.4 in
Replacement Parts
4.4 +/- 0.1 in
Rear Ride Height
4 Door Vehicles
5 - 5.8 in
2 Door Vehicles
4.3 - 4.8 in
Ball Joint Radial Play
Lower Ball Joint Maximum
1/32 in
Upper Ball Joint Maximum
1/32 in
Vehicle Lean
Front Wheel Opening Maximum
0.6 in
Side to Side Height Differences
Rear Wheel Opening Maximum
0.78 in
Torque Specifications
Caster Set Jam Nuts
129 ft lb
Front Suspension Upper Arm Cam Nuts
98 ft lb
Toe Set Jam Nuts
59 ft lb