Mountaineer 4WD V6-245 4.0L VIN X SFI (2000)
![background image](/mercury/mountaineer_4wd/v6-245_4.0l_vin_x_sfi/Page-2046002.png)
3. Remove the rear output shaft speed sensor wires from the electrical shift motor connector.
1. Remove the connector interlock.
2. Remove the wires.
-
Use the proper electrical connector pin remover.
4. Remove the bolt and the sensor.
Installation
1. Caution: Make sure the sensor seats flat against the boss
To install, reverse the removal procedure