Mystique V6-153 2.5L DOHC VIN L SFI (1999)
3. Install the stabilizer link rod to the suspension strut.
^
Attach the wiring harness bracket to the suspension strut.
6. Install the splash shields (right-hand side shown).
7. Install the front wheel.
Vehicles with manual transaxle
8. NOTE: The fill level is 0-5 mm below the lower edge of the filler hole.
Check the transmission fluid level and fill up with Transmission fluid - manual transaxle if necessary.
Vehicles with automatic transaxle
9. Fill up the automatic transaxle with Automatic transmission fluid.
10. Lower the vehicle, tighten the wheel hub retaining nut and the wheel nuts (right - hand side shown).
11. NOTE: Use an Allen key to stop the piston rod from turning.
Tighten the suspension strut nut.
Right
