Mystique V6-153 2.5L DOHC VIN L SFI (1999)
Install the halfshaft.
CAUTION: To avoid damage to the CV joints and boots, do not bend the inner CV joint by more than 18 degrees, the outer CV joint by
not more than 45 degrees.
3. Using the special tool, install the outboard CV joint into the wheel hub (right-hand side shown).
4. Screw on the halfshaft stub nut.
5. CAUTION: Do not damage the CV joint boot and the wheel speed sensor ring.
NOTE: Use a new split pin.
Install the suspension.
1. Install the lower suspension arm to the wheel knuckle.
2. Install the tie-rod end.