mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Cellular Phone|Removal and Installation|Page 11708 > < Cellular Phone|Flow of Diagnosis|Page 11705
Page 1
background image

Cellular Phone: Service and Repair
Removal and Installation

Sedan

REMOVAL

1. Disconnect battery ground cable.
2. Open luggage compartment door and remove LH trim panel.
3. Disconnect mobile telephone power cable from mobile telephone transceiver.
4. Disconnect mobile telephone antenna cable from mobile telephone transceiver.
5. Remove three screws and mobile telephone transceiver from vehicle.

 
INSTALLATION

1. Install mobile telephone transceiver and secure with three retaining screws. Tighten screws to 1.2-1.8 Nm (11-15 Lb-In).
2. Connect antenna cable and mobile telephone power cable to mobile telephone transceiver.
3. Install LH trim panel.
4. Connect battery ground cable.

Wagon

REMOVAL

1. Disconnect battery ground cable.
2. Remove spare tire.
3. Disconnect mobile telephone power cable from mobile telephone transceiver .
4. Disconnect mobile telephone antenna cable from mobile telephone transceiver.

Cellular Phone|Removal and Installation|Page 11708 > < Cellular Phone|Flow of Diagnosis|Page 11705