mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Cellular Phone|Removal and Installation|Page 11709 > < Cellular Phone|Removal and Installation
Page 2
background image

5. Remove two screws and mobile telephone transceiver from vehicle.

INSTALLATION

1. Install mobile telephone transceiver and secure with two retaining screws. Tighten screws to 1.2-1.8 Nm (11-15 Lb-In).
2. Connect antenna cable and mobile telephone power cable to mobile telephone transceiver.
3. Install spare tire.
4. Connect battery ground cable.

Microphone

REMOVAL

1. Remove mobile telephone microphone from roof trim panel at center of windshield.
2. Disconnect and lower roof trim panel of LH side just enough to allow disconnection of mobile telephone power cable from mobile telephone

microphone.

3. Disconnect microphone cable connector and remove mobile telephone microphone.

INSTALLATION

1. Follow removal procedure in reverse order.

Handset

REMOVAL

1. Disconnect mobile telephone handset cord at harness connector.
2. Remove mobile telephone handset from retainer clip and remove mobile telephone handset.

INSTALLATION

1. Follow removal procedure in reverse order.

Cellular Phone|Removal and Installation|Page 11709 > < Cellular Phone|Removal and Installation