Sable V6-183 3.0L DOHC VIN S MFI (1997)
Rear Door Panel: Service and Repair
Removal and Installation
1. Remove cover behind inside door handle.
2. Remove plug button from bottom of pull cup.
3. Remove screw retaining rear door trim panel. Remove lock knob.
4. Starting at bottom of rear door trim panel, carefully remove door panel by pulling away from door.
5. Disconnect electrical connections as necessary.
6. To install, reverse Removal procedure. Tighten door panel retaining screw to 1.4-2.0 N-m (12-18 lb-in).
