Sable V6-183 3.0L DOHC VIN S MFI (1997)
2. Tighten safety belt nut and bolt to 30-40 N.m (23-29 lb-ft).
3. Tighten aft seat retaining bolt to 17-23 N.m (13-16 lb-ft).
Liftgate Header Rail Inside-Wagon
1. Open liftgate.
2. Pull down on liftgate header rail inside moulding to remove.
3. To install follow removal procedure in reverse order.
Liftgate Trim Panel
1. Open liftgate and disconnect heated back window feed wiring and ground wires
2. Remove liftgate upper garnish moulding by pulling away from body.
3. Remove liftgate assist handle screws and assist handle.
4. Remove pushpins retaining oil pan drain plug gasket to liftgate.
