Sable V6-183 3.0L DOHC VIN S MFI (1997)
Install
NOTE: Adhesive bead height must exceed 12.0 mm (0.47 inch) high. Roof trim must be installed within 10 minutes of adhesive application.
1. Apply Headliner Adhesive F1VY-19562-A meeting Ford specification WSB-M2G355-A to roof panel prior to installation.
2. Align roof trim panel at front of vehicle over inside visor mounting holes and secure.
3. Install sliding roof panel headlining retainer so that seam is centered at rear of interior side of roof panel opening in root trim panel.
NOTE: Use small indexing notch in roof trim panel as a guide when centering sliding roof panel headlining retainer.
4. Reverse removal procedure.
Front Door