mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Sliding Roof Glass|Page 12486 > < Sunroof / Moonroof Panel|Adjustments|Height|Page 12483
Page 1
background image

Sunroof / Moonroof Panel: Service and Repair
Sliding Roof Glass

Removal

1.

Raise roof sliding outer glass panel to the vent position.

2.

Remove six screws (three each side) retaining roof sliding outer glass panel to roof sliding panel housing.

3.

From outside of vehicle, lift roof sliding outer glass panel from vehicle.

Installation

1.

With the help of a second technician, position roof sliding outer glass panel to roof sliding panel housing.

2.

While second technician is holding roof sliding outer glass panel from outside vehicle, install screws retaining roof sliding outer glass panel to
roof sliding panel housing. Tighten screws to 0.8-1.5 N.m (7-13 lb-in).

3.

Adjust roof sliding outer glass panel as described.

Sliding Roof Glass|Page 12486 > < Sunroof / Moonroof Panel|Adjustments|Height|Page 12483