Rear Seat Cushion Replacement for Sable V6-183 30L DOHC VIN S MFI (1997)
2. Remove four screws from the front seat cushion side shield.
3. Disconnect front seat adjusting motor drive tube and front seat back pad adjusting tube from seat control switch.
4. Disconnect seat back control switch and housing electrical connectors from seat wiring harness and remove front seat cushion side shield from
seat.
5. Remove two bolts from front seat back latch to front seat cushion frame and spring.
6. Disconnect the front seat adjusting motor drive tube and front seat back pad adjusting tubes between seat back and front seat cushion frame and
spring.
7. Remove J-retainers on cover from front seat cushion frame and spring at front, rear and sides. Remove front seat cushion cover and front seat
cushion pads from front seat cushion frame and spring, making sure that front seat adjusting motor drive tube and front seat back pad adjusting
tubes slide through slit at rear top of inner side facing of front seat cushion cover freely.
8. Lift front and sides of front seat cushion cover from front seat cushion pad exposing front seat cushion cover listings and wires embedded in front
seat cushion pad. Cut four hog rings from each front seat cushion cover side wire listing and each front seat cushion pad wire.
