mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Front Latch|Page 12530 > < Seat Latch|Specifications|Page 12527
Page 1
background image

Seat Latch: Service and Repair
Front Latch

Station Wagon

The rear fold-down seat latches are an integral part of the seat back frame. If service is required the rear seat back frame must be replaced.

REMOVAL 

1. Remove seat back from vehicle.
2. Unzip seat back cover at bottom of seat to access seat back latch.
3. Release latch cable from retainer and pivot cable to disconnect from latch.
4. Pull back seat cover to access handle and retaining bolts.
5. Remove release handle by pushing on the snap features and pulling up on handle.
6. Remove three nuts and remove handle bracket. 

INSTALLATION 

1. Follow removal procedure in reverse order. 

Sedan

The rear fold-down seat latches are an integral part of the seat back frame. If service is required the rear seat back frame must be replaced.

REMOVAL 

1. Fold down affected seat.
2. Carefully pry up on seat back release handle to disengage from seat back frame.
3. Release cable from retainer on latch plate and pivot cable to release from lever.
4. Remove release handle and cable as an assembly.

INSTALLATION 

1. Follow removal procedure in reverse order.

Front Latch|Page 12530 > < Seat Latch|Specifications|Page 12527