Sable V6-183 3.0L DOHC VIN S MFI (1997)
Brake Pad: Service and Repair
Front
Front Caliper Components (Part 1 Of 2)
Front Caliper Components (Part 2 Of 2)
REMOVAL
1. Remove brake master cylinder filler cap. Remove brake fluid until brake master cylinder reservoir is half full. Discard removed fluid.
2. Raise vehicle and support.
3. Remove wheel and tire assembly. Do not damage brake caliper bleeder screw fitting during removal.
3. Remove two rear brake pin retainers. Lift disc brake caliper off front disc brake rotor using rotating motion.
NOTES: