Sable V6-183 3.0L DOHC VIN S MFI (1997)
Camshaft: Description and Operation
-
The four camshafts are installed into the cylinder heads and supported in the cylinder head camshaft journals.
-
Two timing chains connect the crankshaft to the intake camshafts and exhaust camshafts.
-
Camshaft thrust loads and end play are limited by the No. 1 and No.5 cylinder head camshaft journal thrust caps.
-
The camshaft position sensor (CMP sensor) is located on the engine front cover and is triggered by the LH exhaust camshaft sprocket.