Sable V6-183 3.0L DOHC VIN S MFI (1997)
Crankshaft: Testing and Inspection
Journal
PROCEDURES
1. Measure the main and connecting rod journals. Measure the journals in eight locations.
2. Write down the figures on a sketch to give a profile of each journal. A study of the readings will tell if the crankshaft is usable as is, if it must be
reground, or if it must be replaced.
3. The bearing journal diameter specification is:
Main: 62.968-62.992 mm (2.467-2.479 inch).
Connecting Rod: 49.970-49.990 mm (1.967-1.968 inch).
4. The bearing journal Out-Of-Round Limit is:
Main And Connecting Rod: 0.05mm (0.002 inch).
5. If a main journal or connecting rod journal diameter is less than the specification, grind the journal to match an undersize bearing.
