Sable V6-183 3.0L DOHC VIN S MFI (1997)
Intake Manifold: Service and Repair
Cleaning
CAUTION:
Aluminum Components
Do not work on aluminum engine components until the engine is cold.
Cleaning Aluminum Surfaces
Do not use abrasive grinding discs to remove gasket material; use only plastic manual scrapers. Do not scratch or gouge aluminum sealing
surfaces.
-
Remove all gasket material from the machined surfaces of the intake manifold (9424).
-
Clean the intake manifold in a suitable solvent and dry it with compressed air.
-
Clean the EGR exhaust passages.