Sable V6-183 3.0L DOHC VIN S MFI (1997)
electronic blend door actuator.
5. Remove four screws retaining A/C electronic blend door actuator to the A/C evaporator housing and remove A/C electronic blend door actuator
from A/C air temperature control door.
INSTALLATION
1. Insert actuator shaft into A/C air temperature control door and secure A/C electronic blend door actuator to A/C evaporator housing with four
retaining screws.
2. Install electrical connector to bracket on A/C electronic blend door actuator.
3. Install instrument panel insulator and console panel if equipped.
4. Connect battery ground cable.
