Sable V6-183 3.0L DOHC VIN S MFI (1997)
^
Affect normal functional operations of the vehicle.
^
Be directly related to customer concerns.
^
Be undetectable except during diagnostics. To properly diagnose a link concern, follow the diagnostic procedure in the order presented.
Module Identification
Modules included on this ISO 9141 communication link include:
Air Bag Diagnostic Monitor:
^
Located behind the instrument panel to the right of the steering column.
^
A failed air bag diagnostic monitor may cause no communication condition on ISO 9141 communication link.
^
If communication to the air bag diagnostic monitor fails, refer to Air Bags (Supplemental Restraint Systems) for No Communication testing.
Anti-Lock Brake System (ABS) Control Module:
^
Located under the battery tray in the lower left of the engine compartment.
^
A failed anti-lock brake system module may cause no communication condition on ISO 9141 communication link.
^
If communication to the anti-lock brake control module fails, refer to Antilock Brake System for No Communication testing.
Generic Electronic Module (GEM):
^
Is plugged into the fuse junction panel.
^
A failed GEM may cause a no communication condition on ISO 9141 communication link.
^
If communication to the GEM fails, refer to the affected system for No Communication testing.
Remote Anti-Theft Personality (RAP) Module:
^
Located under the instrument panel to the right of the steering column.
^
A failed RAP module may cause no communication condition on ISO 9141 communication link.
^
If communication to the RAP module fails, refer to Locks for No Communication testing.
Semi-Active Ride Control (SARC):
^
Located in the luggage compartment on the front of the RH rear wheel housing.
^
If communication to the semi-active ride control module fails, refer to Suspension for No Communication testing.
