Sable V6-183 3.0L DOHC VIN S MFI (1997)
Fuel Line Coupler: Service and Repair
Spring Lock Coupling
WARNING: Do not smoke, carry lighted tobacco or an open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited, resulting in possible personal injury.
WARNING: Fuel supply lines on vehicles equipped with fuel injected engines will remain pressurized for long periods of time after engine
shutdown. Fuel system pressure must be relieved prior to fuel system service to prevent possible injury. Perform fuel pressure release.
REMOVAL
Fuel Tube Clip
1. Remove clip from spring lock coupling.
2. Position Spring Lock Coupling Disconnect Tool D87L-9280-A for 3/8 inch tube or D87L-9280-B for 1/2 inch tube or equivalent on to coupling.
Make sure that tool can enter cage opening to release the garter spring.
3. Push the spring lock coupling disconnect tool into the cage opening to release the female fitting from the garter spring.
4. Pull the coupling's male and female fittings apart.