Sable V6-183 3.0L DOHC VIN S MFI (1997)
Part 2 Of 2
INSTALLATION
1. Follow removal procedure in reverse order.
2. Align locator pin in accelerator cable to hole in accelerator cable bracket. Tighten cable-to-bracket screw to 5-7 Nm (45-62 lb in). Tighten screws
retaining accelerator cable bracket to throttle body to 8-10 Nm (71-88 lb in). Tighten screws retaining accelerator cable to dash panel to 1.6-2.2
Nm (15-19 lb in).
