Sable V6-183 3.0L DOHC VIN S MFI (1997)
Ignition Coil: Service and Repair
Ignition Coil Pack
REMOVAL
1. Disconnect battery ground cable.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control
Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the strategy.
2. Disconnect engine control sensor wiring from the ignition coil.
3. Disconnect engine control sensor wiring from radio ignition interference capacitor.
Removing Ignition Wires At Coil Pack
4. Disconnect ignition wires by squeezing locking tabs and twisting while pulling upward.
5. Remove four ignition coil retaining bolts and remove ignition coil, radio ignition interference capacitor and ignition coil ground wire. Save radio
ignition interference capacitor and ignition coil ground wire for reinstallation with ignition coil.