Sable V6-183 3.0L DOHC VIN S MFI (1997)
1. Follow removal procedure in reverse order.
2. Prior to installing nut, apply Threadlock 262 (E2FZ-19554-B or equivalent) meeting Ford specification WSK-M2G35 1-A6 to stud.
3. Tighten bolts to 34-46 Nm (25-33 lb ft).
4. Tighten nut to 34-46 Nm (25-33 lb ft).
Seat Belt With Anchor Plate Thread Damage
The lap/shoulder safety belts are factory-installed in their proper locations. If the belts are removed for any reason, they should be installed as described
in Removal and Installation. The 7/16 x 20 Torx head anchor bolts must be hand-started and tightened to 34-46 Nm (25-33 lb ft).
1. Remove broken or stripped bolt and discard.
2. Drill out internal threads in safety belt anchor plate with a 27/64 in drill.
3. Rethread anchor plate with a 1/2-13 tap.
4. Blow out chips.
