Sable V6-183 3.0L DOHC VIN S MFI (1997)
2. Apply a suitable lubricant to the threads of an M14 x 1.5 tap and tap new threads.
NOTE: After each rotation, back tap off slightly to remove new cuttings and be sure to blow out any chips before performing Step 3.
3. Select a thread inserts and hand-screw it into the retapped hole until it is slightly below the surface of the hole.
NOTE: The drive kees on the insert will act as an automatic stop.
4. After installation of the thread insert, use a 12-ounce hammer to lightly tap an installation tool several times to drive down the insert kees.
