Sable V6-183 3.0L DOHC VIN S MFI (1997)
Coolant Level Sensor: Service and Repair
LOW COOLANT LEVEL SENSOR
REMOVAL
1. Remove radiator coolant recovery reservoir.
2. Disconnect harness connector from low coolant level warning sensor.
3. Remove low coolant level warning sensor from radiator coolant recovery reservoir by carefully prying out of radiator coolant recovery reservoir
with a small screwdriver.
INSTALLATION
1. Press low coolant level warning sensor into radiator coolant recovery reservoir and follow removal procedure in reverse order.
2. Verify proper operation.
