Sable V6-183 3.0L DOHC VIN S MFI (1997)
11. Drill three 3.2 mm (1/8 inch) holes through alignment plate and paint exposed metal.
CAUTION: To prevent damage, do not drill deeper than 9.6 mm (3/8 inch) into shock tower.
12. Install three pop-rivets 3.2 mm (1/8 inch) diameter x 6.4 mm (1/4 inch) grip range.
Toe
1. Make sure alignment equipment is calibrated and in good working condition to obtain accurate results.
