Sable V6-183 3.0L DOHC VIN S MFI (1997)
2. Start engine and move steering wheel back and forth several times until it is in straight-ahead or centered position.
3. Turn engine OFF and lock steering wheel in place using a steering wheel holder.
4. Adjust LH and RH tie rod end until each wheel has one-half of desired total toe specification. Correct toe setting is given in Specifications.
NOTE: When jam nuts are loosened for toe adjustment, the nuts must be tightened to 47-63 Nm (35-46 ft. lbs.).
Camber, Rear
Part 1 Of 2
Part 2 Of 2