Sable V6-183 3.0L DOHC VIN S MFI (1997)
Part 2 Of 2
8. Disconnect power steering left turn pressure hose from power steering pump fitting.
9. Disconnect electrical connector from power steering pressure switch (PSP).
10. Disconnect pressure line mounting bracket at top of steering shaft U-joint shield.
11. Disconnect power steering left turn pressure hose from power steering rack fitting and remove power steering left turn pressure hose from vehicle.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Use Steering Pump Pulley Replacer T65P-3A733-C to install power steering pump pulley. Install new O-rings on power steering left turn pressure
hose.
3. Fill and bleed power steering system with Motorcraft MERCON Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or equivalent meeting Ford
MERCON specification. Check system for leaks and proper operation.
Pressure Hose Fittings
