Sable V6-183 3.0L DOHC VIN S MFI (1997)
NOTE: If a leak occurs between the tubing and tube nut, replace the hose assembly. If a leak occurs between the tube nut and the pump outlet, replace
the plastic washer.
1. Check fitting to determine whether leak is between tube and tube nut or between tube nut and pump outlet.
CAUTION: DO NOT overtighten. The casting may crack.
2. If leak is between tube nut and pump outlet, check to make sure nut is tightened to specification. If leak continues or if leak is between tube and
tube nut, remove line.
4. Unscrew tube nut and inspect plastic seal washer. Always replace plastic seal washer when line is removed. To facilitate assembly of new plastic
