Sable V6-183 3.0L DOHC VIN S MFI (1997)
5. Remove clutch spring compressor. Install wave spring, clutch pack, clutch pressure plate and clutch pressure plate retaining ring.
6. Air check clutch assembly for proper operation.
WARNING: To prevent injury, wear eye protection when using pressurized air.
NOTE: Be certain that shop air is dry and regulated at 276 kPa (40 psi).
7. Check clutch pack clearance using feeler gauge. Take two readings, 180° apart, and determine the average of the two readings. The clearance
should be: 0.97-1.63 mm (0.038-0.064 inch).