Sable V6-183 3.0L DOHC VIN S MFI (1997)
8. Tighten the forcing screw on the end of the tool using a 3/4 inch box wrench until the seal portion is removed and discard the seal.
9. Remove RH differential fluid seal.
NOTE: The differential fluid seal is a two-piece seal constructed of an outer metal protector and inner rubber seal.
Differential Seal Removal
a. Install Step Plate Adapter D80L-630-A or equivalent into the differential fluid seal opening. Install the Front Cover Seal Remover
T74P-6700-A and a 5 1/2-inch forcing screw (from T88L-6701-A) into the differential fluid seal opening.
b. Screw the Front Cover Seal Remover T74P-6700-A and 5-1/2 inch forcing screw into the outer metal protector portion using a one inch box
wrench.