Sable V6-183 3.0L DOHC VIN S MFI (1997)
c. Tighten the forcing screw on the end of the tool using a 3/4-inch box wrench until the outer metal protector portion is removed.
d. Remove the outer metal protector portion from the tool and discard. Install the tool into the seal portion using a one-inch box wrench.
e. Tighten the tool using a 3/4 inch box wrench until the seal portion is removed. Remove the seal portion from the tool and discard.
INSTALLATION
1. Install LH differential fluid seal using Output Seal Replacer T86P-1177-B.
