Sable V6-183 3.0L DOHC VIN S MFI (1997)
8. Install No. 11 forward sun gear thrust bearing to the intermediate clutch assembly using petroleum jelly to hold in place.
NOTE: Lip on bearing goes down over hub.
9. Install front sun gear and shell assembly over the direct/intermediate clutch assembly, and into the overdrive drum assembly.
10. Turn complete assembly (with overdrive drum) face-up. Install driven sprocket support into overdrive drum.
CAUTION: Be sure not to damage driven sprocket seals.
NOTE: Do not install No. 8 thrust washer or No. 9 bearing at this time.
