Sable V6-183 3.0L DOHC VIN S MFI (1997)
of the window module. Allow five minutes drying time for the primer.
NOTE: Thoroughly shake and stir Urethane Glass Cleaner WSB-M2G314-B to make sure uniform pigment mixing.
4. Apply a bead of Urethane Adhesive WSB-M2G316-B or equivalent in the track of the pinch weld on top of the existing bed of urethane. The bead
of adhesive should be triangular with a 8 mm (0.32 inch) base and a 14 mm (0.55 inch) height (bead size large enough for proper sealing with no
objectionable expulsion).
5. Position quarter window glass to flange, and press retaining tabs into flange to engage.
CAUTION: Allow all glass parts installed with urethane ample time to cure. If ample time is not allowed, quarter window glass may come loose
or leak.
6. Install five quarter window glass retaining nuts and tighten to 3-4 N.m (27-35 Lb-In).
7. Install interior quarter trim panel.
