Sable V6-3.0L DOHC VIN S (2002)
Vehicles with rear disc brakes
4. Place a box end wrench on the RH rear bleeder screw. Attach a rubber drain tube to the RH rear bleeder screw, and submerge the free end of the
tube in a container partially filled with clean brake fluid.
All vehicles
5. Open the valve on the bleeder tank.
Vehicles with rear drum brakes
6. Loosen the RH rear bleeder screw. Leave open until clear, bubble-free brake fluid flows, then tighten the RH rear bleeder screw and remove the
rubber hose.
Vehicles with rear disc brakes
7. Loosen the RH rear bleeder screw. Leave open until clear, bubble-free brake fluid flows, then tighten the RH rear bleeder screw and remove the
rubber hose.
8. Continue bleeding the rest of the system, going in order from the LH rear bleeder screw to the RH front disc brake caliper bleeder screw, ending
with the LH front disc brake caliper bleeder screw.
9. Close the bleeder tank valve. Remove the tank hose from the adapter, and remove the adapter.